Kenwood KMR-D378BT AM/FM Radio Receiver CD Player USB Port iPod/iPhone Control Bluetooth SiriusXM Satellite Radio Ready Marine Stereo With 400 Watt Amp And 4 Speakers

Code: PKGKMRD378BTX      Last Updated: 2020-07-02 10:07:53 By Rock The Boat

---

Product Details:

This package includes the KMRD378BT Stereo, 400 watt marine amplifier and 4 waterproof marine speakers

Stereo Features:
This stereo will play standard audio CDs and also CDs burned with MP3, WMA and AAC digital music files. You can control and recharge your iPod/iPhone, MP3 player or other USB music device via the front USB port. It also supports streaming audio via Pandora and I Heart Radio when a compatible device is connected. Bluetooth connectivity allows you to stream your music to the stereo wirelessly from a compatible device.

This stereo can be used with the Kenwood remote app which allows you to control all functions of the stereo from your smart phone.

This unit is a marine stereo because it has plasticoted circuit boards to protect against corrosion in a humid and/or salt air environment. It is not completely waterproof, however so if you think it will get splashed or rained on you should use a cover to protect it.

Features:

• Controls and recharges iPods, iPhones, MP3 players and other USB music devices when connected via the front USB port.
  
• Bluetooth compatible - stream your music wirelessly to the stereo from a Bluetooth compatible device. Also control all stereo functions from your smart phone via the Kenwood remote app.
  
• Hands free calling via Bluetooth with included microphone
  
• SiriusXM satellite radio ready (requires SXV300 receiver box and antenna, sold separately)
  
• Wired remote ready. Supports up to 3 KCA-RC55MR remotes and 6 KCA-RC35MR remotes to give you control anywhere on your boat. (remotes sold separately)
  
• 200 Watts Peak Power 50 watts X 4 channels
  
• ID-3 Tag Display allows you to see song and artist information on the screen
  
• 3.5 mm front Aux input for TV or any other external audio source
  
• 3 pairs preamp RCA outputs for sending a clean signal to an external amplifier
  
• Conformal Coated Main Circuit board protects against moisture and corrosion
  
• Variable color LED illumination
  
• 13 digit dimmable LCD display
  
• Rotary Encoder for Easy Operation
  
• Mixed Station Presets
  
• 1 year manufacturer warranty
  
• 7" x 2" installation cutout

Amplifier Features
This compact 4 channel marine amplifier can power up to 8 speakers (wired in parallel), or 4 speakers and a subwoofer. It is bridgeable and 2 ohm stable. Class D digital design packs more power into a smaller unit and runs cooler than comparable analog amps.

This unit has conformal coated circuit boards to prevent corrosion in a marine environment. It is not waterproof, however, so we recommend you install it out of the weather where it won't get wet.

• Signal sensing turn on - unit turns on when it senses an incoming audio signal
  
• 400 watts total peak power
  
• 45 watts RMS x 4 channels at 4 ohms
  
• 45 watts RMS x 4 channels at 2 ohms
  
• 90 watts RMS x 2 channels bridged
  
• Conformal resin coating on the circuit boards prevents corrosion
  
• Accepts both speaker level and line level input for installation flexibility
  
• Built in crossover (frequency filters) for optimal subwoofer configuration
  
• Dimensions: 6 1/2" x 1 3/4" x 3 7/8"
  
• CEA-2006 Compliant
  
• 1 year manufacturer warranty

Speaker Features

• Waterproof - resistant to rain, splashing and hosing down
  
• UV resistant grill and frame
  
• 150 watts peak power each speaker
  
• 50 watts RMS (continuous) power each speaker
  
• Efficiency: 86 dB
  
• 6.5 inch polypropylene waterproof woofer cone
  
• 1 inch balanced dome tweeter
  
• 4 ohms impedence
  
• 60Hz-20,000Hz frequency response
  
• Cutout diameter: 5 1/8"
  
• Overall diameter: 6 15/16"
  
• Mounting depth: 2 7/8"
  
• Corrosion resistant mounting hardware included
  
• 1 year manufacturer warranty

Download manual or factory spec sheet

---

Related Items: