Aquatic AV AQ-AD300.2 600 Watt 2 Channel Waterproof Marine Amp With 4 7.5″ Speakers

Description

Click here to download the product manual or factory spec sheet

This package consists of the amplifier and 4 waterproof coaxial speakers

While most marine amplifiers have corrosion protection, not many can boast IP66 standard waterproofing protection against spray, salt and fog like this model! If you need a powerful amplifier that can get wet, this might be the amp for you.

This 2 channel amp can power 2 or 4 speakers. As a digital amp it runs cooler and packs more power into a smaller unit than similar analog amps.

• Waterproof – IP66 rated: tested for salt/fog/spray
• 600 watts approximately total peak power
• 288 watts RMS continuous power at 2 ohms 2 channels x 144 watts
• 150 watts RMS continuous power at 4 ohms 2 channels x 75 watts
• Frequency response: 10Hz – 50,000Hz
• Gold plated connectors
• Line level inputs powered level inputs allow you to use a preamp output from your stereo or the powered speaker outputs to provide an audio signal
• Size: 8 1/2″ x 5 1/2″ x 1 3/4″
• 1 year manufacturer warranty

Speaker Features:

• 100 watts peak power handling each speaker
• 50 watts RMS continuous power handling each speaker
• Waterproof and UV resistant Certification: RoHS, ASTM B117, ASTM D4329
• 2 way coaxial
• 6.5″ Polypropylene Woofer Cone
• 20 mm Neodymium Tweeter
• Frequency Response: 80Hz-20kHz
• Non-corrosive rubber surround
• 4 ohm impedence
• Removable grill
• Stainless steel mounting hardware included
• Cutout diameter: 5 5/8″
• Mounting depth: 2 5/8″
• Grill diameter: 7 3/4″
• 1 year manufacturer warranty